Automatic Watering System Controller Mini Water Pump Compatible with Arduino/ micro:bit/ Raspberry Pi
Automatic Watering System Controller Mini Water Pump Compatible with Arduino/ micro:bit/ Raspberry Pi
Product Description
High-quality FR-04 double-sided material with a large area of 62*48mm, which is more conducive to raindrop detection. The surface is treated with immersion gold, which has excellent performance in anti-oxidation, conductivity and service life.
Feature
Hardware preparation
Software preparation
Wiring preparation
Arduino UNO+Arduino expansion board. Use the 4PIN wire to connect the sensor to the A2 port on the Arduino expansion board.
Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board
Arduino programming code
Packing List
1* Raindrops module
1* 4PIN wire (20cm)
Automatic Watering System Controller Mini Water Pump Compatible with Arduino/ micro:bit/ Raspberry Pi
- Working voltage is 5V
- AD converter digits is 10 digits
- AD value: 0~400 (no rain environment); 400~1000 (rainy environment)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Product SKU: HW2019127
- Category: All Products, Arduino, Arduino2022, micro:bit&Scratch, micro:bit2, microbit&Scratch, Module & Sensor, Module/Sensor, Module/Sensor, Module/Sensor, Raspberry Pi 2022, Scratch, Sensor

- Order within
Available:
In Stock
$5.99

Product Description
High-quality FR-04 double-sided material with a large area of 62*48mm, which is more conducive to raindrop detection. The surface is treated with immersion gold, which has excellent performance in anti-oxidation, conductivity and service life.
Feature
- Voltage: 5V
- AD converter digits: 10 digits
- AD voltage: 5V
- AD value: 0~400 (no rain environment); 400~1000 (rainy environment)
- Size: 62mm*48mm
- Support: compatible with Lego series


Hardware preparation

Software preparation

Wiring preparation
Arduino UNO+Arduino expansion board. Use the 4PIN wire to connect the sensor to the A2 port on the Arduino expansion board.
Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board
Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board


Arduino programming code
- Connect the Arduino UNO development board with the expansion board to the computer through the USB cable
- Use Arduino IDE to open the program
- Select the corresponding development board and open the connection port
- Open the serial port monitor and set the baud rate to 9600, upload the program
- Insert the sensor into the soil with different humidity and observe the data changes

Packing List
1* Raindrops module
1* 4PIN wire (20cm)
1* 4PIN wire (20cm)

- Voltage: 5V
- AD converter digits: 10 digits
- AD voltage: 5V
- AD value: 0~400 (no rain environment); 400~1000 (rainy environment)
- Size: 62mm*48mm
- Support: compatible with Lego series




Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board


- Connect the Arduino UNO development board with the expansion board to the computer through the USB cable
- Use Arduino IDE to open the program
- Select the corresponding development board and open the connection port
- Open the serial port monitor and set the baud rate to 9600, upload the program
- Insert the sensor into the soil with different humidity and observe the data changes

1* 4PIN wire (20cm)
Item | Specification |
Voltage | 5V |
AD converter digits | 10 digits |
AD voltage | 5V |
AD value | 0~400 (no rain environment); 400~1000 (rainy environment) |
Size | 62mm*48mm |
Support | compatible with Lego series |