Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection
Rated 3.5/5 based on 11 customer reviews
Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection
Hiwonder

Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection

  • High-precision six potentiometers
  • Over-current protection
  • The voltage that the controller require should correspond to the voltage required by the servo that you controlled
Image
  • Order within
Available: In Stock
$18.00
Wishlist Compare
Hiwonder 6 channel digital servo tester uses high-precision six potentiometers, Which can control the corresponding six servos simultaneously.

 

 Feature

  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.

  • The 0th, 1st, 2nd and 3rd connectors have over-current protection to prevent servo from burning out due to over-current.

  • The voltage that the controller requires should correspond to the voltage required by the servo that you controlled.

  • There is a small button under each knob of the controller, press it, the servo will return to the center of the state.

This product: Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection
$18.00 1800
Hiwonder LD-220MG Full Metal Gear Digital Servo with Dual Ball Bearing,Metal Servo Horn, Metal Bracket for Robot
$20.80 2080
Hiwonder LD-27MG Full Metal Gear Digital Servo with 270 Control Angle, Aluminium Case for Robot RC Car
$24.00 2400
$62.80
Hiwonder 6 channel digital servo tester uses high-precision six potentiometers, Which can control the corresponding six servos simultaneously.

 

 Feature

  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.

  • The 0th, 1st, 2nd and 3rd connectors have over-current protection to prevent servo from burning out due to over-current.

  • The voltage that the controller requires should correspond to the voltage required by the servo that you controlled.

  • There is a small button under each knob of the controller, press it, the servo will return to the center of the state.

Item

Specification

Dimension

76mm*53mm (2.99inch*2.09inch)

Weight

37g (1.31oz)

Wiring Instruction

+: connect the 5-8.4v power supply.
-：connect the power supply negative.
the voltage that the tester requires should correspond to the voltage required by a servo that you controlled.

Package List

1* servo tester
1* screw package