Soil Moisture Sensor Module Detector Soil Hygrometer Detection Module Detection Depth for Arduino UNO
Soil Moisture Sensor Module Detector Soil Hygrometer Detection Module Detection Depth for Arduino UNO
Product Description
The surface adopts immersion gold technology to improve the corrosion resistance of the sensor in the soil. Can provide more accurate soil moisture data.
Feature
Hardware preparation
Software preparation
Wiring preparation
Arduino UNO+Arduino expansion board. Use the 4PIN wire to connect the sensor to the A2 port on the Arduino expansion board.
Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board
Arduino programming code
Packing List
1* Soil module
1* 4PIN wire (20cm)
Soil Moisture Sensor Module Detector Soil Hygrometer Detection Module Detection Depth for Arduino UNO
- Working voltage is 5V
- AD converter digits is 10 digits
- AD value: 0~400 (dry soil); 400~800 (moist soil); 800~950 (in the water)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Product SKU: HW2019124
- Category: All Products, Arduino, Arduino2022, micro:bit, micro:bit2, Module & Sensor, Module/Sensor, Module/Sensor, Module/Sensor, New Arrivals, Scratch, Sensor

- Order within
Available:
In Stock
$7.99

Product Description
The surface adopts immersion gold technology to improve the corrosion resistance of the sensor in the soil. Can provide more accurate soil moisture data.
Feature
- Voltage: 5V
- AD converter digits: 10 digits
- AD voltage: 5V
- AD value: 0~400 (dry soil); 400~800 (moist soil); 800~950 (in the water)
- Size: 48mm*24mm
- Support: compatible with Lego series


Hardware preparation

Software preparation

Wiring preparation
Arduino UNO+Arduino expansion board. Use the 4PIN wire to connect the sensor to the A2 port on the Arduino expansion board.
Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board
Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board


Arduino programming code
- Connect the Arduino UNO development board with the expansion board to the computer through the USB cable
- Use Arduino IDE to open the program
- Select the corresponding development board and open the connection port
- Open the serial port monitor and set the baud rate to 9600, upload the program
- Insert the sensor into the soil with different humidity and observe the data changes

Packing List
1* Soil module
1* 4PIN wire (20cm)
1* 4PIN wire (20cm)

- Voltage: 5V
- AD converter digits: 10 digits
- AD voltage: 5V
- AD value: 0~400 (dry soil); 400~800 (moist soil); 800~950 (in the water)
- Size: 48mm*24mm
- Support: compatible with Lego series




Note: If you do not use the Arduino expansion board, please use DuPont cable to connect the sensor to the Arduino development board


- Connect the Arduino UNO development board with the expansion board to the computer through the USB cable
- Use Arduino IDE to open the program
- Select the corresponding development board and open the connection port
- Open the serial port monitor and set the baud rate to 9600, upload the program
- Insert the sensor into the soil with different humidity and observe the data changes

1* 4PIN wire (20cm)
Item | Specification |
Voltage | 5V |
AD converter digits | 10 digits |
AD voltage | 5V |
AD value | 0~400 (dry soil); 400~800 (moist soil); 800~950 (in the water) |
Size | 48mm*24mm |
Support | compatible with Lego series |