Tonybot: Hiwonder Humanoid Robot Educational Programming Kit/Arduino
Tonybot: Hiwonder Humanoid Robot Educational Programming Kit/Arduino
Product Description
Hiwonder Tonybot is a programmable humanoid robot based on the Arduino platform. Its body is equipped with 16 high-voltage bus servos. There are more than 10 built-in action groups which can complete Walking, Dancing, Exercise etc.
Tonybot is loaded with a sensor expansion kit for you carry out secondary development through Arduino programming. Feature
Squat to Cross
Shake to Avoid Obstacle
Treasure Hunt
Chasing
Stand Up Intelligently
Tonybot has built-in accelerometer to obtain its current posture via reading, filtering, calculating etc. After falling, it can detect and stand up automatically.
Glowing Ultrasonic Sensor
New ultrasonic sensor features accurate measurement and detection with RGB. It can exhibit millions of colors for luminous effect by programming.
Control Method
Support PC software and infrared remote control.
Humanoid Robot Controller
Arduino Secondary Development Controller
Arduino Secondary Development Controller
High Voltage Bus Servo
11.1V high voltage bus servo reduces current bymore than 60%, which improves the robot's service time.
Large Capacity Lithium Battery
Tonybot is equipped with 11.1V 2000mAh 10C high voltage lithium battery. Its running time is about 120 minutes.
Tonybot Packing List
1* Tonybot humanoid robot (assembled)
1* 11.1V lithium battery charger
1* Nano data cable 1*Accessory kit
1* Infrared remote control
1* Micro USB cable
1* Screwdriver
Tonybot Packing List
Tonybot: Hiwonder Humanoid Robot Educational Programming Kit/Arduino
- Provide open source of Arduino
- Provide PC software and infrared remote control
- Abundant intelligent games, detailed tutorials
- Upgrade glowing ultrasonic sensor
- Hiwonder high voltage bus servos, long service time
- Compatible with Hiwonder sensors
- Product SKU: HW2019115
- Category: All Products, Arduino, Arduino-1, Arduino2022, Best Seller, Competition Robot, Humanoid Robot, New Arrivals, Promotions, Robotics, Robotics

- Order within
Available:
In Stock
$459.99

Product Description
Hiwonder Tonybot is a programmable humanoid robot based on the Arduino platform. Its body is equipped with 16 high-voltage bus servos. There are more than 10 built-in action groups which can complete Walking, Dancing, Exercise etc.
Tonybot is loaded with a sensor expansion kit for you carry out secondary development through Arduino programming.
Tonybot is loaded with a sensor expansion kit for you carry out secondary development through Arduino programming.
Feature
- New glowing ultrasonic sensor with RGB
- Provide open source of Arduino and code with annotations
- 11.1V high-voltage servo can reduce the current by more than 60%
- New version PC Software for easier operation
- Compatible with Hiwonder sensors

Squat to Cross

Shake to Avoid Obstacle

Treasure Hunt

Chasing

Stand Up Intelligently
Tonybot has built-in accelerometer to obtain its current posture via reading, filtering, calculating etc. After falling, it can detect and stand up automatically.

Glowing Ultrasonic Sensor
New ultrasonic sensor features accurate measurement and detection with RGB. It can exhibit millions of colors for luminous effect by programming.



Control Method
Support PC software and infrared remote control.

Humanoid Robot Controller
- Built-in accelerometer
- Buzzer for low voltage alarm
- Support serial communication
- Online debugging and free computer drive

Arduino Secondary Development Controller
Arduino Secondary Development Controller
- Built-in accelerometer, IR receiver, buzzer etc
- 3 IIC ports for expansion
- Nano pins and 4PIN ports
- Compatible with Hiwonder sensors
- Built-in accelerometer
- Buzzer for low voltage alarm
- Support serial communication
- Online debugging and free computer drive
- Built-in accelerometer, IR receiver, buzzer etc
- 3 IIC ports for expansion
- Nano pins and 4PIN ports
- Compatible with Hiwonder sensors

High Voltage Bus Servo
11.1V high voltage bus servo reduces current bymore than 60%, which improves the robot's service time.
Large Capacity Lithium Battery
Tonybot is equipped with 11.1V 2000mAh 10C high voltage lithium battery. Its running time is about 120 minutes.

Tonybot Packing List
1* Tonybot humanoid robot (assembled)
1* 11.1V lithium battery charger
1* Nano data cable 1*Accessory kit
1* Infrared remote control
1* Micro USB cable
1* Screwdriver
1* 11.1V lithium battery charger
1* Nano data cable 1*Accessory kit
1* Infrared remote control
1* Micro USB cable
1* Screwdriver
Tonybot Packing List
Tonybot humanoid robot (assembled) | 1set | Infrared remote control | 1pcs |
11.1V lithium battery charger | 1pcs | Micro USB cable | 1pcs |
Nano data cable | 1pcs | Screwdriver | 1pcs |
Accessory kit | 1pcs |


Tonybot is loaded with a sensor expansion kit for you carry out secondary development through Arduino programming. Feature
- New glowing ultrasonic sensor with RGB
- Provide open source of Arduino and code with annotations
- 11.1V high-voltage servo can reduce the current by more than 60%
- New version PC Software for easier operation
- Compatible with Hiwonder sensors










- Built-in accelerometer
- Buzzer for low voltage alarm
- Support serial communication
- Online debugging and free computer drive

- Built-in accelerometer, IR receiver, buzzer etc
- 3 IIC ports for expansion
- Nano pins and 4PIN ports
- Compatible with Hiwonder sensors
- Built-in accelerometer
- Buzzer for low voltage alarm
- Support serial communication
- Online debugging and free computer drive
- Built-in accelerometer, IR receiver, buzzer etc
- 3 IIC ports for expansion
- Nano pins and 4PIN ports
- Compatible with Hiwonder sensors


1* 11.1V lithium battery charger
1* Nano data cable 1*Accessory kit
1* Infrared remote control
1* Micro USB cable
1* Screwdriver
Tonybot Packing List
Tonybot humanoid robot (assembled) | 1set | Infrared remote control | 1pcs |
11.1V lithium battery charger | 1pcs | Micro USB cable | 1pcs |
Nano data cable | 1pcs | Screwdriver | 1pcs |
Accessory kit | 1pcs |

Item | Specification |
Body size | Height 379* Width 187*Thickness 121 (mm) |
Body weight | About 1.8kg |
Body material | Aluminum alloy |
Ultrasonic distance | 2~400cm |
Power Supply | Battery: 11.1V 2000mAh 10C lithium battery Working hours: Keep running about 80min-120min |
DOF | Head: 1DOF Shoulder: 2DOF Hand: 2 DOF each hand Leg: 4 DOF each leg Foot: 1 DOF each foot |
Control System | Hardware: Special controller for humanoid robot and Arduino secondary development controller PC software: Graphical PC software |
Other Parameters |
Servo parameters: LX-824HV high voltage bus servo; metal gear; weight: about 57g; |
Packing List of Tonybot Humanoid Robot Standard Version |
1* Tonybot humanoid robot (assembled) 1* 11.1V lithium battery charger 1* Nano data cable 1* Infrared remote control 1* Micro USB cable 1* Screwdriver 1* Accessory kit |