add wishlist add wishlist show wishlist add compare add compare show compare preloader icon-theme-126 icon-theme-161 icon-theme-138 icon-theme-027 electro-thumb electro-return-icon electro-brands-icon electro-payment
  • +86 18825289328

Bus Servo

Showing 1 - 16 of 21 items
  • 【30KG High Torque】Using Hiwonder's self-developed high-performance motor as the core power, the HTS- 30HS servo's stall torque reaches 30kg.cm at 12V voltage, making your robot more powerful.
  • 【Import Potentiometer】The servo uses an imported high-precision potentiometer as angle feedback. The precision and linearity of the servo are very good, making the robot run more stable. The service life of the servo is also greatly extended.
  • 【Temperature/Voltage Feedback】With temperature feedback and voltage feedback, the internal data of the servo can be understood in real time to protect the servo.
  • 【Metal Gears】The gears are made of stainless steel, which enhances the wear resistance and lifespan of the gears.
  • Built-in Anti-burning and Anti-blocking Algorithm
  • High Temperature Resistant Motor
  • ID Identification Bus Communication
  • Supports Servo Mode and Geared Motor Mode
  • Temperature/Voltage Feedback and Angle Readback
  • Built-in Anti-burning and Anti-blocking Algorithm
  • High Temperature Resistant Motor
  • ID Identification Bus Communication
  • Supports Servo Mode and Geared Motor Mode
  • Temperature/Voltage Feedback and Angle Readback
  • Torque: 17kg large torque. 17 kg/cm (236 oz/in) @6V; 20 kg/cm (270 oz/in) @7.4V
  • Metal Gear: Adopts all-metal geard inside, strong, durable and long service time
  • Variable ID: The default number is 1 which is modifiable. And it can be controlled by serial port commands, connected to multiple servos at the same time
  • Details Tutorial: Provide bus servo communication protocol, Provide for 51 and STM32 source code
  • Dimensions:45.22mmx24.72mmx36.3mm(1.78inch*0.97inch*1.38inch);Weight:54g (1.90oz) only
$16.99

Hiwonder

  • Easy to install and long service life
  • Use 12 bit high precision non-contact magnetic encoder
  • Absolute angle control accuracy reaches 360 degrees
  • High torque up to 30kg.cm 11.1V
  • Support temperature, voltage and position feedback
  • Three connectors for clean wiring
  • High precision and strong torque
  • With real-time temperature, voltage and position feedback
  • Provide 51, Arduino, STM32 and Raspberry Pi control source code
  • Metal gear for higher accuracy and stronger torque
  • Support temperature, voltage and position feedback
  • Two working modes: servo mode and gear motor mode
  • Provide 51, Arduino, STM32, Raspberry Pi source code
  • Metal gear for higher accuracy and stronger torque
  • Support temperature, voltage and position feedback
  • Two working modes: servo mode and gear motor mode
  • Provide 51, Arduino, STM32, Raspberry Pi source code
  • Three connectors for clean wiring
  • High precision and strong torque
  • With real-time temperature, voltage and position feedback
  • Provide 51, Arduino, STM32 and Raspberry Pi control source code
$23.99

Hiwonder

  • Three ports for connection
  • High accuracy performance and strong torque
  • Support temperature, voltage and position feedback
  • Provide 51, Arduino, STM32, Raspberry Pi source code
  • User-friendly ports
  • High precision and strong torque
  • Support temperature, voltage and position feedback
  • Support two working modes: servo mode and gear motor mode
  • Provide 51, Arduino, STM32, Raspberry Pi source code
  • Clean Wiring -Three Channels on the top, left and right are easy for wiring.
  • Large Torque - Maximum torque is up to 35kg.cm 7.4V. 240 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities
  • Variable ID -The default number is 1 which is modifiable. It can be used to replace xArm ID5 servo
  • Support Feedback- position/temperature/voltage feedback for protecting the servo from burning.
  • Details Tutorial - Provide bus servo communication protocol, 51 Arduino and STM32 source code.
  • Dimensions -2.14 x 0.79 x1.79inch (54.38 x 20.14 x 45.5mm); Weight: 64g (2.22oz) only
  • High accuracy performance
  • Three Ports for Connection
  • Support temperature/voltage/position
  • Provide 51, Arduino, STM32, Raspberry Pi source code
  • Upgraded Version -Three Channels on the top, left and right are easy for wiring.
  • Large Torque - Maximum torque is up to 25kg.cm 7.4V. 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
  • Variable ID -The default number is 1 which is modifiable. It can be used to replace xArm ID5 servo.
  • Details Tutorial - Provide bus servo communication protocol, Provide for Arduino and STM32 source code.
  • Dimensions -1.57 x 0.79 x 2.01inch (40 x 20.14 x 51.1mm); Weight: 63g (2.22oz) only.
  • Single shaft serial bus intelligent servo
  • 20kg Strong Torque with metal gear
  • Equipped with position/temperature/voltage feedback
  • User-friendly connector
  • User-friendly ports
  • Extra-long battery life
  • High precision servo
  • Support phone, handle and computer control
  • Integrated structure sinificantly strengthen the robot body
Light
Dark